How to Make a Pet-Proof Screen Panel for Your Moving Glass Door

I have three pet dogs, and I survive on the bottom floor of an apartment building. My moving glass patio door encounters the parking area, and dogs and their owners walk past at all times. Chipmunks and also squirrels scurry across my patio.

The pet dogs strolling by drive my pet bananas. The little creatures as well as birds drive my pet cats nuts. All 3 intend to survive the screen as rapidly as possible. My felines in fact determined how to pop the gliding screen door out of its track so that they could run out singing, “Born Free,” in feline language.

Develop Your Own Cheap and also Easy Pet-Friendly Screen Door

I had the choice of fixing the screen door, however, it would certainly set you back $500 to replace the mangled track. I attempted leaving the patio door closed regularly, however, I missed the fresh air. I tried leaning the screen door back on the track and placing a baby gate in the entrance, yet the felines climbed it as well as the pet dog knocked it down. I attempted wedging the screen back in the track, yet after that, it couldn’t open up as well as shut, as well as I could not utilize the door.

So, I went to Home Depot as well as tried to determine how best to fix this trouble. I created this panel, and also it set you back regarding $30 as well as an hr to make.

I hope a person can benefit from this.

You Will Need:
a stitching needle
button thread or floss
a piece of cable shelving, 16″ broad with a one-inch lip (step one consists of more guidelines).
A roll of window screen material.

Tip One: The Cable Shelf.

Step your gliding door height from an all-time low to about an inch from the top. Markdown this dimension.
Most likely to the hardware shop and also try to find cord wardrobe shelving, the bigger the far better. Mine was 16″ as well as it was the best I could find.

Make certain the lip of the rack is the thin type (concerning 3/4″ -1″) as well as not both inch kind. It is in some cases called a low-profile lip.
Get the actually lengthy rack pieces and also have them cut it for you to your measurement. If you come in handy, you can cut it yourself with the snips given.

You can order the rack noted to the right on, as well as they will cut it to your measurements as well as send it to your door.

Tip 2: Gauge the Screen.

Lay the rack on the flooring.
Unfold the screen product on the floor beside it to get an item off screen one and also a fifty percent inches longer than the shelf panel.
Place the shelf over the screen piece on the floor and, with scissors, cut around the panel to obtain an item that coincides dimension as the panel besides an inch as well as a half protruding greater at the top of the panel.

Tip 3: Straighten the screen.

Lay the rack on the floor with the bottom of the lip encountering up (base of the shelf is up).
If your door slides to the left out the lip encountering the left on the flooring.
If your door slides to the right, placed the lip encountering precisely the flooring.
Place the piece of screen on the panel, with the additional inch and a half of the screen sticking out of the top. Align all edges.

Tip Four: Sew on the Screen.

Don’t stress if you can’t stitch! This is not truly stitching.
Pick about 16 points around the screen, mainly on the outside, but a few on the inside. Points in the image are simply example points; you can select your very own.
At each point, make use of the needle and also string or dental floss to secure the screen to the bars of the shelf. Simply make a stitch via the screen, around the bar, back up via the screen, as well as link completions of the string in a tight knot.
Repeat until the screen is securely secured to the rack panel.

Step 5: You’re Done! Make use of the screen!

Open your outdoor patio door.

Make sure the side with the extra inch of screen is facing up, and that the lip is toward the wall side of your door.

Place the lip of the rack right into the groove of your patio area door framework in the wall.

If possible, place the all-time low of the rack right into the bottom track of the door.

Move your patio area door closed to the various other ends of the rack. The non-lip side of the shelf should fit between the locking systems of your patio area door, holding it a lot more safely. Experiment with it to find the best means to put the panel.

Adjust the additional inch of the screen at the top to cover the room between the door frame as well as the panel. The extra inch of space gives the panel area to be moved up as well as down when it is being moved.


Tip Six: Delight In the New Screen.

Pet dogs should not have the ability to survive unless you have an extremely exuberant pet dog with a great deal of body weight. Watch your pets to see just how they respond.

Bring the panel inside when not in use. It can be kept for the winter.

This panel will certainly not shut out insects as well as your routine screen, however, it does good work.

You can open up as well as shut the door with the screen staying in position relatively well if it is located effectively in the door grooves. The entrance is narrower but is still huge sufficient for lots of people to walk through.

( note: If you already have a screen in place and just wish to maintain your pet dog from going through it, simply stick the shelving in the door as stated above and also skip the entire connecting the screening point. It can just be a pet-proof gate!).

This article is precise as well as real to the most effective of the author’s expertise. It is not suggested substitute for medical diagnosis, diagnosis, treatment, prescription, or official and also customized guidance from a veterinary medical professional. Pets displaying signs and symptoms of distress should be seen by a vet right away.

Back to top